TREATMENT FOR CEMENT AND CERAMIC TILES – 0531

CHARACTERISTICS
This treatment protects cement tiles and porcelain stoneware against oil, grease and water stains. It leaves no visible film.

APPLICATION
Do not apply on hot soil, exposed to the sun or below 15°. Apply in 2 to 3 coats with a brush, a sponge or a wetting machine on a new or old, clean and dry floor without any trace of wax, varnish or other treatment, which would cause a bad penetration of the product and a bad drying.

– On new floors: when the floor is dry, clean and dust free, apply with a wide brush, a sponge or a wetting machine the treatment 0531 in abundant and regular cross layers. Ensure proper distribution and no excess. Drying: 2 to 3 hours and more between each coat. Repeat the operation.

– On old soil: it must be free of any previous treatment and dry. To clean and remove finishes and pre-treatments, use our 0901 Heavy Duty Cleaner. After rinsing, let dry well and then apply treatment 0531 (see ¤ previous). Finishing: after a drying time of 24 hours or more, we can apply a finish that will give a satin aspect with our Palm Wax Emulsion 0722, very easy to maintain.

– Cleaning of brushes: with White Spirit.

– Yield: 10 to 12 m2 per liter.

PRECAUTIONS FOR USE
Read the safety label carefully – Work in a well ventilated room – Do not swallow – Keep out of reach of children. Information given in good faith, but we are not responsible for it.

see data sheet

See data sheet