HARD STONE TREATMENT – SLATE – MARBLE – AGED MARBLE – 0527

CHARACTERISTICS
Protects hard stones, marbles and slates from oil, grease and water stains. It leaves no visible film.

APPLICATION
Do not use below 15°C, on hot or sunny ground.

– Apply in 2 or 3 coats on a new or old, clean and dry floor, without any trace of other treatment, which would lead to a bad penetration and a bad drying of the product. On new floors: when the floor is perfectly dry, apply with a brush, a wetting machine or a rubber squeegee in regular cross-coats.

– Ensure proper distribution and no excess. Drying: 4 to 8 hours between each coat. On old floors: it must be free of any previous treatment, use our 0901 heavy duty cleaner (see FT). When the soil is perfectly dry apply treatment 0527 (see previous §).

– Finishing: For interiors, after a drying time of 72 hours or more, we can apply a finish that will give a satin aspect, with our palm wax emulsion 0722 or an unequalled shine with our patina wax 0007 (see FT).

– Cleaning of tools: with White Spirit.

– Coverage: 10 to 15 m2 per liter depending on the porosity of the support.

PRECAUTIONS FOR USE Read the safety label carefully – Work in a well ventilated area – Do not swallow – Keep out of reach of children. Information given in good faith, but we are not responsible for it.

see data sheet

See data sheet