METAL VARNISH – 0517

CHARACTERISTICS
To protect copper, bronze and brass or any other metal. Available in glossy.

APPLICATION
On dry, clean and degreased metal, by brush, spray or dip:

– Brush: dilute to 20-30% with thinner 0417 in one or two coats.

– Spray: dilute to 30 or 40% with thinner 0417 in one or two coats.

– When dipped: do not dilute.

DRYING Drying time : 1 to 2 hours between each coat at 20°C. Maximum hardness is obtained after 24 or 48 hours.

Thinning and cleaning of tools: with Thinner 0417.

Yield: 15 to 18 m2 per liter.

STORAGE
Always repackage the product in a smaller package suitable for the quantity remaining.

PRECAUTIONS FOR USE
Safety precautions : – Read the safety label carefully – Work in a well-ventilated room or wear a suitable mask – Wear rubber gloves – Do not swallow – Keep out of reach of children.

Information given in good faith, but we are not responsible for it.

see data sheet