POPOTE – 0706

CHARACTERISTICS
This product is a polish which allows to repolish and make shine any type of varnish, lacquer. Use only on glossy finishes (not on satin or matte).

APPLICATION
Shake well before use. On an old varnish or lacquer, using a cotton swab or a varnish wick soaked with popote, apply on the varnish to be renovated with a light pressure by forming circles or 8 on the whole surface until the swab is dry. Repeat the operation, turning the pad over on the clean side. When finished, shine with a clean pad. If the varnish has lost its transparency or has whitened, first use our reviver 0705. This product can not be used on all varnishes, read the technical data sheet and make preliminary tests on hidden parts. To finish a new pad varnish: After lightening with alcohol and letting the varnish harden for 6 to 8 hours, give a “dab” of Popote, which will remove any remaining oil and give a nice shine. Use a clean, dry pad identical to the one used for thinning. Soak lightly in Popote and using light pressure, turn the pad while drying.

PRECAUTIONS FOR USE Read the safety label carefully – Wear rubber gloves – Do not swallow – Keep out of reach of children. Information given in good faith, but we are not responsible for it.

see data sheet