WHITE PASTE CERUSE – 0509

It is used in decoration for floors, woodwork, furniture, etc.

It is stained with decorative earths to avoid staining the wood.

FEATURES
:

A ready-to-use white paste, it is used to make patinas and to wax oak or other woods, preferably with large pores.

APPLICATION
:

Apply to clean, dry, sanded wood. Open the pores of the wood with a fine wire brush (brush in the direction of the wood grain). After lightly sanding, apply a thin coat of cellulose or polyurethane hardener or parquet varnish, then lightly re-spray. Stir the white glaze well and apply it with a brush or a large burlap cloth (you can extend the paste with glaze liquid 0508). After drying for 2 to 4 hours, depending on the temperature, lightly sand the excess and apply a coat of varnish or wax. Open the pores of the wood with a fine wire brush (brush in the direction of the wood grain).

Brush cleaning: with White Spirit.

Yield: 6 to 8 m2 per kg.

PRECAUTIONS FOR USE: Read the safety label carefully. Work in a well ventilated room. Wear rubber gloves. Do not swallow, keep out of reach of children.

Information given in good faith, but we are not responsible for it.

see data sheet