AQUEOUS TREATMENT FOR STONE AND CONCRETE – 0226

CHARACTERISTICS: This treatment protects porous terracotta from oil, grease, water and other stains.

It leaves no visible film.

APPLICATION: Do not use at temperatures below 15°, on hot or sunny ground. It is applied in 2 or 3 coats on a new or old clean and dry floor, without any trace of other treatment, which would lead to a bad penetration and a bad drying of the product.

Drying time: 2 to 4 hours between coats.

On an old floor: it must be free of any previous treatment, use our 0901 high-powered cleaner.

Finishing: after drying for 48 hours or more, you can apply a satin finish with our 0722 palm wax emulsion or an unsurpassed shine with our 0007 terracotta patina wax (see FT).

Cleaning of brushes: with White Spirit.

Coverage: 8 to 10 m² per liter, depending on the porosity of the substrate.

PRECAUTIONS FOR USE: Read safety label carefully.

– Work in a well-ventilated area

– Do not swallow

– Keep out of reach of children.

Information given in good faith but for which we cannot be held responsible