STONE VARNISH – 0525

CHARACTERISTICS
Presented in a single package, therefore no mixing of catalysts, which offers the advantage of simplicity and flexibility of use. Brush or spray application. Intended especially for the varnishing of stones, the Stone Varnish 0525 can be applied in the buildings to the interior, on any type of stone. It is perfectly suited as a protective varnish and allows excellent achievements in decoration. Its technical qualities make it appreciated in multiple uses. Do not apply on marble. The micromolecular chemical structure of the resin it contains gives it a remarkable flexibility. Its high film-forming content is the reason for its excellent covering power.

APPLICATION
Stir thoroughly before use. Temperature: 18 to 22°. Apply with a brush or a spray gun, in two or three coats on dry and dust-free stones. The first coat should be thinned to 10% with 0401 thinner or White Spirit, which facilitates adhesion after 4 to 6 hours of drying, depending on the ambient temperature. Second coat: undiluted, drying 2 to 4 hours. Third (top) coat: undiluted if necessary.

– Cleaning of tools: with White Spirit.

– Coverage: 8 to 10 m2 per liter per coat.

STORAGE
Always repackage in a smaller package adapted to the remaining quantity.

PRECAUTIONS FOR USE
Read the safety label carefully – Work in a well-ventilated area or wear a suitable mask – Wear rubber gloves – Do not swallow – Keep out of reach of children. Information given in good faith, but we are not responsible for it.

see data sheet