STRIPPER FOR CEMENT TILES AFTER INSTALLATION – 0823

After the floor has dried completely, cement efflorescence appears and must be removed.

The success of a beautiful finish depends on this operation.

After laying CIMENT TILES, it is important to allow the floor to dry thoroughly.

Drying time depends on the season and ambient temperature,

You’ll need: 0823 DÉCAPANT CARREAUX CIMENT, rubber gloves, sponge, wide brush or wooden spatula.

APPLICATION:

This preparation is done in small successive areas.

Depending on the degree of efflorescence and cement to be removed, apply Stripper 0823 diluted from 20% > to pure, using a sponge or wide brush.

Leave on for 5 to 15 minutes, then rinse with clean water.

If cement remains on your floor, reapply cement tile stripper 0823.

leave to act and scrape off with a wooden spatula.

RINSE:

Rinse thoroughly with water several times to remove the Terracotta Stripper.

To make rinsing easier, use a water vacuum cleaner to avoid re-depositing limescale.

Cleaning of brushes: with water

CONSUMPTION: 5 to 8 m2 per liter

Security:

– read the safety label carefully,

– work in a well-ventilated room,

– wear rubber gloves,

– do not swallow,

– keep out of reach of children.

Information given in good faith, but we are not responsible for it.