STONE AND MARBLE TREATMENT – 0526

CHARACTERISTICS
Treats and protects stones from oil, grease and water stains and leaves no apparent film.

APPLICATION
Do not use below 15°C, on hot or sunny ground. Application in 2 or 3 coats on a new or old floor, clean and dry, without any trace of other treatment, which would lead to a bad penetration and a bad drying of the product.

– On new floors: after drying, prepare the floor by removing cement efflorescence with our stripper 0820 (see FT). When the floor has been thoroughly rinsed and is dry, apply with a brush, roller or sponge, in abundant and regular cross-coats. Ensure proper distribution and no excess. Drying: 4 to 8 hours between each coat.

– On an old floor: it must be free of any previous treatment, use our 0901 heavy duty cleaner (see FT). When the soil is ready and perfectly dry, apply treatment 0526 (see ¤ previous).

– Cleaning of brushes: with White Spirit.

– Coverage: 8 to 10 m2 per liter depending on the porosity of the support.

PRECAUTIONS FOR USE Read the safety label carefully – Work in a well ventilated area – Do not swallow – Keep out of reach of children. Information given in good faith, but we are not responsible for it.

see data sheet

See data sheet