COLORLESS WATER-BASED PROTECTIVE OIL 40 SECONDS – 0216T

DOES NOT ALTER OR DARKEN GRAY WOODS

This water-based oil emulsion allows you to make a quality finish while keeping the natural look. Its Ph is adapted to be applied on rather basic woods.

PREPARATION:
Oxidized or unoxidized wood must be dry, chipped and dusted.

APPLICATION:
” MIX WELL BEFORE USE “
On all interior wood species apply in two or three coats. For the second coat it is important to apply it wet on wet or almost wet because a second coat on a very dry first coat will have difficulty to cling and to tighten.
On very hard woods, the first coat can be diluted to 10% with water. Its viscosity is about 40 seconds (n*4 cut) and is suitable for industrial application by roller.

MANUAL APPLICATION:
Can be applied with a roller or a brush in a thin and regular layer

INDUSTRIAL APPLICATION:
Is done with a standard roller machine.

FINISH:
After drying, we can give a small finish with a WHITE PAD which will give a certain shine to the wood.

TOOL CLEANING: with water.

CONSUMPTION: 8 to 10 m2 per liter depending on the porosity of the support.

SECURITY

• It is essential to wear rubber gloves
• Do not swallow
• Keep out of reach of children.

Information given in good faith, but we are not responsible for it.

See Technical Data Sheet